Silo vs. hopper: what you're counting at an asphalt plant

If you've spent any time squinting at plant yard imagery trying to size up a facility, you've run into the same problem every BD analyst runs into: there are a lot of cylindrical and cone-bottomed things on an asphalt plant site, and not all of them tell you what you think they tell you. Getting silo, hopper, surge bin, and cold feed bin sorted out matters, because only one of those categories tracks with finished-mix capacity.
Cold feed bins: feed capacity, not storage capacity
Cold feed bins sit at the front end of the plant, usually four to six of them in a row, low to the ground, each one feeding a different aggregate size onto a collecting belt that runs up into the drum. They're hopper-shaped (sloped walls, narrow discharge) and that's exactly why people lump them in with storage silos. Don't. A row of cold feed bins tells you about mix design flexibility, how many aggregate fractions the plant can blend on a given job, not how much finished product it can hold. From the air, the tell is the layout: a straight row of squat bins under a conveyor gantry, almost always at ground level.
A hopper, generically, is any vessel built to meter material out the bottom on a schedule, whether that's onto a belt, into a weigh box, or down a chute. Cold feed bins are hoppers. The RAP bin feeding recycled material into the drum is a hopper. The small transfer hoppers under a baghouse are hoppers. None of them are built to hold finished product for any length of time. They move material, they don't bank it.
A silo is the opposite job: a tall vertical vessel, usually a cone-bottomed cylinder, sized to hold finished hot mix (or sometimes RAP) for hours, sometimes overnight, with a truck loadout chute and scale underneath it. Storage silos are what let a plant keep running after the trucks stop showing up, or start loading before the drum is even hot that morning. They're also, almost always, the tallest freestanding structures on the yard besides the baghouse stack and the control tower, which is the single easiest thing to key off of in aerial or satellite imagery.
The surge bin sits in between, functionally and visually. It's one bin, sometimes two, positioned right at the drum discharge, built to hold a load or two of mix just long enough to smooth out truck queuing so the drum doesn't have to stop every time a truck pulls away late. A surge bin is not a storage silo. A plant running on surge alone is dumping to truck in close to real time: production rate and sale rate are basically the same number, and there's no banked capacity sitting in reserve. A plant with two or three storage silos behind that surge bin is a different business. It can run product ahead of demand, hold inventory through a slow afternoon, and take on volume a surge-only plant physically can't.
Why this is the number you actually want
If you're scoping a territory and trying to figure out who's running tight on capacity and who's got room to grow (or who's overdue to add a silo), the count you want is storage silos specifically, by height class, not a tally of every hopper-shaped object on the lot. A plant that's added a silo since your last pass has made a capacity decision. A plant that's still running on one surge bin after five years probably hasn't, and that's worth knowing before you make the call.
This is the structure we track plant by plant, once a year, straight from imagery: silo and stockpile counts across a territory, without anyone having to drive the yard or get the plant manager on the phone.
If you're mapping capacity across more than a handful of plants, it's worth seeing what a territory looks like once it's counted this way.