Know which plants have outgrown their silo line before you pick up the phone.
An annual read of silos, hoppers and stockpiles at concrete and asphalt plants across your territory, taken from imagery.
Key
- Configuration change since the last pass
- No change
- Unreadable: roofed or screened
How the territory list gets worked today
You own the territory plan for a plant equipment maker, and the list behind it is a spreadsheet. It started as a trade directory, picked up names from old quotes, and grew with whatever the field reps remembered to send in. The list says where a plant is. It says nothing about whether the plant has outgrown its setup.
So someone calls. The inside-sales caller or the regional rep phones the plant manager, asks how many silos are on the yard and whether the cold feed bins keep up in peak weeks, and types the answer into the account record. Many calls reach a front desk. The busy plants, the ones that may need a bigger silo line or another bin, are the hardest to get on the phone in season. You end up with detailed notes on the friendly plants and nothing on the rest.
The upgrade conversations that matter happen before the off-season, and the call list is built before that. By the time the notes are in, the quoting window may be shrinking.

A yard shows a lot from above. You can count silos, see how long the bin line runs and watch a stockpile area spread toward the fence. This page offers a pass over your territory that does that counting for you and hands back a plant list with what was counted and, from the second pass, what changed.
What the pilot list is for
The product is not yet a shipped service. Pilot-list members help shape what the first territory pass contains. This is the intended shape.
- 2.1
Plant map
Map + plant listEvery concrete and asphalt plant found in your territory, placed on a map, with a site ID you can match to your own CRM record. Delivered as a file you can load into your GIS or join to your account list.
- 2.2
Silo and hopper inventory
TablePer plant, the number of silos and the number of cold feed bins seen on the yard at the time of the pass, and whether the image gave a clear read. A plant under a roof or with its equipment screened is marked as unreadable, never guessed.
- 2.3
Stockpile footprint
TableThe plan-view area of the aggregate and RAP piles at each plant. This is footprint, meaning the ground the piles cover. It says nothing about tons.
- 2.4
Year-over-year change note
Change flagFrom the second annual pass on, each plant is flagged if its silo count, bin line or stockpile footprint changed. The first pass is a baseline and carries no change note.
How it works
Send the territory
Give us a boundary, or a list of plants you already track, as coordinates or addresses.
Imagery pass
We pick a usable very-high-resolution pass over each plant. It comes from satellite or aerial, in RGB, cloud-free and in daylight.
Count and measure
Plants are located, then silos, bins and stockpile footprint are read from the image. A person on the project team checks the ones the read is unsure about.
Hand-over
You get the map and the inventory table. A year later, you get the same again plus what changed.
Where it fits
Run it ahead of the territory plan. Use the inventory to choose which plants to call first, and from the second pass, the change note to spot growth. The call itself is still yours. You're just no longer opening with "how many silos do you have?"
Limits
These are the ways a plant read from above can mislead you.
Configuration, not output
We read what is on the yard. A plant's tons per hour, tons shipped or hours run cannot be seen from above, and nothing here estimates them. The footprint is a clue to replacement need, and you still have to ask the plant.
Roofs hide equipment
Covered bays, enclosed bins and equipment under a canopy don't show up in optical imagery. Those plants are marked as unreadable.
Half a metre is the floor
At 0.5 m or finer a silo is easy to count. A hopper is small and sits close to its neighbours, so a tight bin line may be read as one run rather than each bin. Bin counts carry that caveat, and the table says when the read is a run rather than a count.
Cloud and light
The pass needs clear sky and daylight. A plant with no usable image that year shows as a gap.
Annual means it lags
A silo put up a month after the pass shows up a year later. The map is a shortlist for the next planning cycle, not a live view of the yard.
Not every plant is found
Small mobile or temporary plants, and plants hidden in an industrial cluster, can be missed. The plant list is a strong start for a territory, not a full census.
Who it's for
- Business development and sales analysts at batch-plant and asphalt-plant equipment makers who own a territory list.
- Regional sales managers who want to know which plants to visit first before the off-season.
Who it's not for
- Teams that need plant throughput, production tonnage or utilization. That takes the plant's own records.
- A replacement for the site visit. This builds the shortlist, and the survey still happens on the ground.
- Live monitoring of a plant's day-to-day activity.
- Enforcement, permit checks or environmental compliance work.
Questions from the sales team
Can you tell me a plant's throughput?
No. We read physical configuration, meaning silos, bins and stockpile footprint. Output in tons per hour or tons a year isn't visible from above.
Do you name the plant's owner?
No. We locate and describe the site. If you supply the operator name, it goes into the table against the site, and that's all.
What about plants under a roof?
Covered equipment can't be read from optical imagery. Those plants show as unreadable in the table.
How current is the map?
It is as current as the latest usable annual pass over each plant. Some plants will be a year old by the time you look.
Can we check it against what we already know?
Yes. Every row carries its image date and site coordinates, so your reps can compare it with plants they have already walked. Tell us which ones when the territory is scoped and we'll show them side by side.
Will it load into our CRM?
The plant list is meant to come as a flat file with coordinates and an ID, so it can be joined to your account records. The exact fields are agreed in scoping.
Who owns the data we receive?
Terms for the delivered tables and map are written into the agreement before any work starts. The imagery sources keep their own licences.
How is it priced?
Each territory is scoped and quoted on its own. The pilot list is how you tell us what yours looks like.
Can this replace a site visit?
No. It builds the shortlist of where to go. The visit or the phone call is still how you confirm the upgrade need.
Map the territory before the call list.
Tell us the region and we'll tell you what a first pass would cover.