Portable vs. stationary asphalt plants: what satellite imagery shows

When you're scrolling through imagery trying to figure out which pins on your territory map are worth a phone call, the portable-versus-stationary question comes up fast. A plant that's been bolted to a concrete pad for twenty years has different replacement timing than one that rolled in on a lowboy eight months ago. Here's what separates them when you're looking down from above instead of standing at the scale house.
Footprint and pad
Stationary plants sit on a poured foundation, and it shows. You'll see a rectangular concrete pad under the drum and tower, often with a drainage apron around it, and the whole arrangement tends to be squared off and permanent-looking. The yard around it has settled into a fixed layout: same stockpile bays, same haul road, year after year.
Portable plants look improvised by comparison, because they are. The drum and control house sit on skid frames or a trailer chassis, and the ground underneath is usually just compacted base or gravel, not poured concrete. At 0.5 m resolution you won't always resolve the axles, but you can usually tell from the shadow pattern and the lack of a hard pad edge that nothing's anchored. Stockpiles tend to be looser too, dumped in temporary windrows rather than the neat, repeated cone shapes you get at a plant that's processed the same aggregate mix for a decade.
Relocatable plants split the difference and cause most of the confusion. They're built to move, but operators often leave them in place for a season or two on a job that justifies it, sometimes on a light pad. If you see a modular plant with a reasonably fixed stockpile layout but no permanent conveyor or rail spur feeding it, that's your relocatable signature.
Silo count and stockpile layout
Silo configuration is the faster tell, and it's the one we track year over year for exactly this reason. A stationary plant generally runs multiple silos, often three or more, arranged in a bank next to the tower, because the operator is storing several mix designs for a steady customer base. Portable setups usually run one or two silos, sometimes just a single surge bin, because the whole point is to haul minimal iron to the job and haul it back out.
Stockpile footprint tells a similar story. Stationary sites show a committed aggregate yard: distinct piles for different stone sizes, sand, RAP, laid out in a pattern that hasn't moved in the imagery from one pass to the next. Portable sites often show a single working pile or two, positioned close to the plant because there's no room or reason to spread out.
Why the distinction matters for your territory list
None of this tells you what's inside the drum or who manufactured it. What it does tell you is where to spend your calling time. A stationary plant with a silo bank that hasn't changed in your last two passes is either running fine or quietly overdue, and a flat year-over-year silo count next to an aging tower structure is worth a closer look. A portable plant that shows up in a new county this year and a different one last year tells you the owner is chasing DOT contracts, which is a different conversation entirely than a capacity upgrade pitch.
This is the kind of pattern that's hard to keep straight across a few hundred sites from memory or from a spreadsheet someone updated two years ago. A yearly imagery pass that logs silo count, stockpile footprint, and the change from the prior year turns that into something you can actually work from before you pick up the phone.
If you're trying to build that list for your own territory instead of guessing from old visit notes, that's the exact problem Asphalt Plant Mapping is built to solve.